The checks
Chassis number, VIN or engine number: which one do you need?
4 min read

A VIN, a chassis number and an engine number are three different things. Which one identifies the car, where to find it, and which a PPSR check uses.
The short answer
The VIN and the chassis number both identify the vehicle itself. The engine number identifies only the engine. A PPSR check is made on the VIN, or on the chassis number for a vehicle that has no VIN, and never on the engine number.
What a VIN is
A Vehicle Identification Number (VIN) is a 17-character code that follows an international standard. Australian vehicles have carried one since 1989. It never uses the letters I, O or Q, so a character that looks like one of those is the digit 1 or 0.
You will usually find it on the compliance or build plate, at the lower corner of the windscreen, stamped into the body, and on the registration papers.
What a chassis number is
A chassis number is the manufacturer's own number for the vehicle, from before the 17-character standard or from a market that did not use it. It is usually shorter than a VIN and follows the manufacturer's own format. On an imported car it is often called the frame number, which means the same thing.
Cars and light commercials built before 1989 carry one, and so do many imported cars, particularly those built for the Japanese market, whose frame numbers are a model code, a hyphen and a serial. Some older trailers and home-built vehicles have one too.
When a vehicle has no VIN, its chassis number is what the registers record it by, and what a PPSR search is made on.
Why the engine number is not the car's identity
The engine number is stamped on the engine block and identifies the engine alone. Engines are replaced, swapped between cars and rebuilt, so the engine in a car today may not be the one it left the factory with, and the registers do not track a car by it.
An engine number can look like a chassis number, especially on an older car. Length and format do not tell you which number you are looking at: where it is stamped does. A PPSR search on an engine number will not find the car.
Which number to use for a PPSR check
Work through these in order:
- A car built from 1989: its 17-character VIN.
- A car built before 1989: its chassis number, from the body or frame and the registration papers.
- An imported car: the number on its registration papers, which may be a VIN or the original frame number.
- Not sure: start from the registration. The registers hold the number they know the car by, and the search runs on that.
Common questions
- What is the difference between a chassis number and a VIN?
- Both identify the vehicle. A VIN is the 17-character international standard used on Australian vehicles since 1989. A chassis number is the manufacturer's own number, used on older cars and many imports, usually shorter and in the manufacturer's own format.
- Can I use the engine number for a PPSR check?
- No. The engine number identifies the engine only and can change if the engine is replaced. A PPSR search is made on the VIN, or on the chassis number for a vehicle without a VIN.
- Is a frame number the same as a chassis number?
- Yes. Frame number is the term often used for imported cars, particularly from Japan. It is the manufacturer's number for the vehicle and is searched the same way.
Check the car you are looking at
Enter an Australian registration plate, a 17-character VIN or a chassis number. Confirm which vehicle it is for free, then run the official register search.
Cars built before 1989 and many imports carry a chassis or frame number instead of a 17-character VIN. It is usually on the registration papers and stamped into the body, often on the firewall, a chassis rail or a plate in the engine bay. It is not the engine number. Type it exactly, including any hyphen: your certificate will cover the number entered here.


